This is a list of miscellaneous tools for sale. Some of them will have a button to click to see a picture. Instead of having to load each image to continue, just scroll this list and click to see an image.

This section has Doweling Machines, Miscellaneous Wood Working Tools, including Jointer Fences, Metal Working, Caulking Irons, Wheelwright and Sheet-metal Tools

Back To Tool Index Back to Homepage

Note: I have Ordering Instructions. Just click on Click To Order in any section, or right here.

Wood Working Tools

Other Woodworking Click To Order

1. In the Box STANLEY NO. 386, JOINTER FENCE, Has the notched-rectangle logo on the adjusting bar. Fits on the side of the No. 5 and longer bench planes to plane boards at an angle. Complete and entirely functional. Virtually all of the nickel plating remains. The box has some open corners, and other damage, Fine .......... $195.00
   Picture
   Picture - Bottom

2. STEARNS JOINTER FENCE. Fits on the side of a plane to plane boards at an angle. Nine inches wide, Fine .......... $60.00
   Picture
   Picture

3. STANLEY NO. 89 CLAPBOARD GAUGE. Used to hold clapboard siding in place for measurement and nailing. The gauge slips under the siding board below, and locks into place to hold the current board. Move the handle sideways for a spur to lock them in place. Some nickel plating is missing, G+ ........... $35.00
   Picture
   Picture - Bottom

4. STANLEY NO. 89 CLAPBOARD GAUGE. Used to hold clapboard siding in place for measurement and nailing. The gauge slips under the siding board below, and locks into place to hold the current board. Move the handle sideways for a spur to lock them in place. Some nickel plating is missing, G+ ........... $35.00
   Picture
   Picture - Bottom

5. JOHNSON PATENT CLAPBOARD GAUGE. Used to hold clapboard siding to a wall with equal spacing, for measurement or nailing. Marked only "Patent", but I believe it is the Johnson Patent, Fine ........... $65.00
   Picture

6. STANLEY NO. 88 CLAPBOARD MARKING GAUGE. Sweetheart logo and 9-7-(19)15 patent date stamped on the frame. Runs up against the corner boards to exactly mark the siding, Looks like it has never been used, Fine+ ........... $50.00
   Picture

7. STANLEY NO. 200 SHARPENING JIG. For chisels and plane irons. It adjusts to the bevel degree you want. Has the 12-10-(19)12 patent date cast in the body, Fine ........... $95.00
   Picture

8. MILLERS FALLS CHISEL and PLANE IRON SHARPENER, NO. 240. In the original box with instructions, Fine ........... $90.00
   Picture with box
   Picture

9. NORTON No. 3 HARD ARKANSAS ROUND EDGE SLIP STONE. Translucent. Three inches long. In the original box, FINE ........... $50.00
   Picture

10. TIMBER SCRIBE, Not marked by the Mfr. Beech handle with brass ferrule. Nice condition with some stain from age, G++ ............. $50.00
    Picture

    30

11. Boxed CARD NO. 51 TAP & DIE SET. This one has a set of collars - 4, 6. 8, 8, 10, 12 and 14, that attach to the large die stock to guide the work. The box is 6 by 9 inches.
    The 4-36 die and the 14-20 tap are missing. The other taps are mixed makers, G+ ........... $30.00
    Picture

12. BERG NO. 528, ESKULSTUNA, SWEDEN, Diagonal cutters. 4 1/2 inch length. For piano wire, G++ ........... Sold $20.00
    Picture

13. CRAFTSMAN, DRILL INDEX. For number drills, 4 1/2 inches long. No. 1 through 60. Cast metal, G++ ........... Sold $20.00
    Picture

14. MILLERS FALLS NO. 3 HAND VISE. 1 1/2-inch jaws. Box with a picture-label has some damage, G++ ........... $35.00
    Picture

15. HAND VISE, With wood handle. 1 1/4-inch jaws, G+ .... $40.00
    Picture

16. STANLEY No. 701 BENCH VISE, Sweetheart logo. 1 1/2 inch jaws, 5 1/2 inches long. Has some rust and light pitting, G ......... Sold $30.00
    Picture

17. STANLEY NO. 707 VISE, A practical auxiliary vise for holding small work. It has 1 5/8 inch jaws open to 2-inches.Some dings on the top of the jaws, G+ ........ Sold $30.00
    Picture

18. TOP & BOTTOM SWAGE, 3/4 INCH Beall Bros., Iron City. 5/8 inch tang, G+. ............. $50.00
    Picture

19. ACME, 5/8 inch Top fuller. Wire rope handle, G+ . ............. $45.00
    Picture

20. HELLER, 1/4-inch hot punch. Tape on handle, G+ ............. $50.00
    Picture

21. UNMARKED HAMMER, 2 1/2 lb. slender head is 7-inches long. Ends taper to 7/8-inches, G ............. $45.00
    Picture

22. PEXTO RAISING HAMMER, 2 lb. smaller one with 1 1/4- and 1 1/2-inch curved faces. Small ding near the edge of the big face, G ............. Sold $50.00
    Picture

23. UNMARKED TOP FULLER OR FORMER, Looks like a flatter but with a gently curved bottom that's 2 1/2-inches wide, G ............. $60.00
    Picture
    Picture - End

Back To Tool Index Back to Homepage