This is a list of wrenches & hammers for sale. Some of them will have a button to click to see a picture. Instead of having to load each image to continue, just scroll this list and click to see an image.

Back To Tool Index Back to Homepage

Note: I have Ordering Instructions. Just click on Click To Order in any section, or right here.

Hammers
Click To Order

1. CAPEWELL PATENT TACK HAMMER. This is the early one with a spring-loaded cast iron tack puller. Pat Nov. 25 1873 cast in the side of the head. Ten inches long. This one has a high Gizmosity factor, G+ ......... $95.00
   Picture Picture

2. CHENEY CLAW HAMMER, 20 oz.? Round-face. Has the ball-bearing, nail-holding feature at the top of the claw.In very nice, shiny condition, Fine ......... $75.00
   Picture Picture - Top

3. ALUMINUM CROSS-PEIN HAMMER. The head is 1 1/4-inches in diameter. R. L. Heath on the side of the head is probably the owner/maker, G+ ......... $35.00
   Picture Picture

4. RANCHMAN COMBINATION TOOL (for fencing and other farm chores) It has a hammer and hatchet, nippers, wire cutter, screwdriver, nail puller and leather punch. 12 1/2 inches overall length, G+ .......... $50.00
   Picture

5. ATOMIC FENCING HAMMER. A hammer with an unusual name and design. Could be easily carried around. Used to repair barb-wire fencing. It has been called a saddle hammer because of the loop at the bottom, but, I think it's too small to fit over the saddle horn. Instead, I think they would put an available branch through it to get leverage when tightening the fence wire, G+ .......... $95.00
   Picture
   Picture - Other Side
   

6. SLATER'S TOOL SET. Slater's hammer, shingle-splitting anvil. and a zax, for removing shingles on a roof by going under them and pulling the nails, G+, ........... $80.00
   Picture

7. CRESCENT TOOL CO. HAMMER/SCREWDRIVER 4-inch size. The handle rotates, G+ ......... Sold $40.00
   Picture

8. PLANISHING HAMMER. With bulbous handle, G+ ......... Sold $65.00
   Picture

9. OSBORNE & CO. 000 RIVETING HAMMER. Harrison, N.J. About two-ounce. Orange handle, Fine ..................... $40.00
   Picture

10. CAPEWELL PATENT TACK HAMMER. Pat July 25, 1893 stamped on the side of the claw. Ebonized handle with some crazing, G++ ......... $40.00
    Picture

11. BRASS-FACED MACHINIST'S HAMMER. Steel hammer, 3 1/2 inches high, with brass faces that are held in place with allen screws on the side. The brass faces are dinged, G++ ......... Sold $65.00
    Picture

12. SNOW KNOCKER HAMMER with a clip on the end. Used with a sleigh for cleaning snow and ice from the horses hooves in winter, G+......... $40.00
    Picture

13. IRON TACK HAMMER, seven inches long with a claw at the bottom of the open handle, G++ ......... Sold $35.00
    Picture

14. MASSIVE OLD HAMMER. Marked L. V. STOREY The head is around three pounds. When I bought it 40 years ago, i was told it was a French bookbinder's hammer.... It may be a blacksmith's rounding hammer. I don't know. Whatever it is, it's really nice. The old handle may be a replacement, G+ ......... Sold $145.00
    Picture

15. BRIAR EDGE SERVICE TOOL CLAW HAMMER, 7 oz. Original handle is marked, along with the head, G++ ......... $35.00
    Picture

16. STANLEY NO. 52 1/2 CLAW HAMMER, 10 oz. Original handle, G++ ......... Sold $40.00
    Picture

17. MILLERS FALLS 1418 CLAW HAMMER, 7 oz. Original handle has a hang hole. Head is crisp but a little dirty, G+ ......... Sold $35.00
    Picture

18. STANLEY NO. 12 CLAW HAMMER, 7 oz. It's marked 7 oz. but the whole thing weighs 12 oz. Sweetheart logo stamped on the head. Original handle, G+ ......... $40.00
    Picture

Wrenches
Click To Order

1. BENTON WRENCH, Patent Pending. 7 inch quick-adjust. Twist the handle to adjust and then turn to tighten. A couple of dings and some nickel loss, G+ .......... $90.00
   Picture

2. WRIGHT WRENCH, CANTON, OHIO. Quick-adjust wrench that's six-inches long. Looks like a 1909 patent date. Missing some nickel plating and some wear to the jaws, G+ ............ $75.00
   Picture

3. GIRARD SPECIAL, Girard Wrench Mfg. Co, 6-inch length. Some bangs to the jaws. Marked In stock by Crerar Adams & Co. Chicago, Ill, G+ ...................... Sold $45.00
   Picture

4. T & L, NEW YORK. SAFETY WRENCH, TOWER & amp; LYON. Four-inch length. Dull finish and some wear to the jaws, G ............ $50.00
   Picture

5. PEXTO NO.1 RADIO SOCKET WRENCH SET Driver handle with five bits. Original box top is dirty and missing a side, G++ .......... Sold $30.00
   Picture

6. EIFEL-GEARED PLIERENCH KIT, Small 7 inch length. Has the regular, pipe and wire jaws. This is an amazing wrench for use, Fine .......... $60.00
   Picture

7. EIFEL-GEARED PLIERENCH KIT, 8 1/2 inch length. Has the regular, pipe and wire jaws. This is an amazing wrench for use. With the original pouch, Fine .......... $70.00
   Picture

8. BAILOR PLOW CO., IMPLEMENT WRENCH, No. C49, Atchison, Kan. 9 3/4 inch length overall, G+ ........... Sold $25.00
   Picture

9. BILLINGS & SPENCER, 5 1/2 inch Bicycle wrench. Unique side-mounted worm gear. Made exclusively for POPE MFG. CO. and Patd Jan 15th, 1895 stamped on it. Some minor dings to the jaws, G+ ........... $75.00
   Picture

10. COCHRAN SPEEDNUT WRENCH. Cam-action quick-adjust. 9 inches overall, G++ ......... $35.00
    Picture

11. BILLINGS & SPENCER PLIERS. 13 1/2 inches long. Patented Mar 12, (19)07, G+ .......... $35.00
    Picture

12. W. SCHOLLHORN NIPPERS, Bernard's patent nippers. Pat. Oct. 24, 1899. 90% nickel plating remains, G+ .......... $25.00
    Picture

13. POPE MFG. CO. PREMEIR NO. 7 BICYCLE WRENCH. 4 inch. 98% nickel plating with some tool-box scratches, Fine .......... Sold $65.00
    Picture

14. BULLARD NO. 0 WRENCH, 5 1/2 inch length. Pat'd Oct 27, (19)03. Almost all of the nickel plating remains, G+++ .......... $85.00
    Picture

15. N.Y.N.H.&H RR OPEN END WRENCH, New York, New Haven and Hartford Railroad. 9 inches long, G+ .......... $20.00
    Picture

16. DIAMALLOY, 4 inch crescent-type wrench. An earlier one with stamped name and a 5/16 wrench in the hole in the end, G++ .............. $35.00
    Picture

17. WIZARD, H 2400, 4 inch crescent-type wrench, Fine ............ $25.00
    Picture

18. UTICA, 4 1/2 inch crescent-type wrench. Extra-large jaws, Fine ......... Sold $40.00
    Picture

19. HAMMOND MFG. CO., BOSTON, MASS, PIPE AND NUT WRENCH, Patented April 3, 1900. The patent date is cast in the handle. A small, unusual quick-adjust wrench. 7 inches overall length.G++ .......... $155.00
    Picture

20. H & H CO., BALTO, MD. A 6 inch quick-adjust monkey wrench. The back collar has a wedge that tightens the lower jaw at different toothed settings. The roughness in the picture appears to be from casting. Not pitting, G+ .............. Sold $85.00
    Picture

21. VACUUM GRIP PLIERS, 4 1/2 inches, Early snap on. Cute, G++ .......... $20.00
    Picture

22. PLATTINA CAM-ACTION WRENCH, Made in Germany. 8 inch. THese are handy to use, G+ .......... $25.00
    Picture

23. Wm. HJORTH & CO., EMPIRE PIPE WRENCH, 10 inch, Pat Dec 29, 1896. The rivet that holds the quick-adjust feature is missing and has been replaced with a nail. An easy fix. G+ .......... Sold $60.00
    Picture

24. EATON, COLE & BURNHAM, Pipe wrench. Franklin patent, July 20, 1886. Not in Schultz. Small chip in the back of the inset lower jaw. G+ .......... $65.00
    Picture

25. UNIVERSAL WRENCH CO., Bartow, Florida. Buggy Wrench, Pat 1921, G+ .......... $60.00
    Picture

26. WRIGHT WRENCH, TACOMA, WASHINGTON, Pat 3-04, 10 inch quick-adjust nut wrench, G+ ............ $75.00
    Picture

27. WRIGHT WRENCH, TACOMA, WASH, quick-adjust nut wrench, Same as above, except this one is 15 inches, and has a steel sleeve for a handle, G+ ............ $75.00
    Picture

28. THE WAKEFIELD WRENCH, plier-type ,quick-adjust nut wrench from Worcester, Mass, 15"long, G ............ Sold $25.00
    Picture

29. BECKLIN WRENCH CO., Seattle, Wash., Pat'd Mar 10, 1920, 14 inch. Rotate the toothed lever on the back for quick adjustment, G+ ........... Sold $105.00
    Picture

30. BEMIS & CALL CO. NO. 2, Looks like it can be used on nuts or pipe. Has a toothed spur on the lower jaw. 13 inches long. Not in Schultz, G+ ............ $65.00
    Picture

31. TROJAN WRENCH, L. A. CAL., US PAT. NO. 1968783. A quick-adjust pipe wrench, I believe, because the increments on the jaws are graduated from 1/8 to 1 1/4 inches. G+ .............. $75.00
    Picture

32. RHINO WRENCH CO., Denver, Pat. No. 143898, self-adjusting pipe wrench, G+ ........... $65.00
    Picture

33. RHINO WRENCH CO., Denver, Pat. No. 143898, Here's a different Rhino design that I haven't seen before. SUPPL is scratched on the back side, G+ ........... $65.00
    Picture

34. UNMARKED, (Marked SUL.) 9 1/2 inch nut wrench with sliding wedge adjustment, like the Standard. G+ ........... Sold $35.00
    Picture

35. WINNER TOOL CO., Puyallup, Wash., Pat'd Mar 7, 1922, 6 inch plier-wrench, The smallest size. Looks like it has a hang-hole, G+ ............ $65.00
    Picture

36. WINNER TOOL CO., Puyallup, Wash., Pat'd Mar 7, 1922, 8 inch plier-wrench, G+ ................... $65.00
    Picture

37. L. P. WRENCH, This was apparently the predecessor to the Winner, above. Has May 2, 1915, July 2, 1918, and March 7, 1922 patent dates, G+ ............ $55.00
    Picture

38. UNIVERSAL, Patented 6-3-19. 1-22-19, 6 inch Crescent-type wrench with plier-action, G ............ Sold $45.00
    Picture

39. BENTON, Pat. Pending, twist the handle to adjust the jaws, twist again to lock, G+ ......... $95.00
    Picture

40. BOOS TOOL CORP, K. C. MO. unusual 6 inch screw-adjust wrench, G++ ......... $25.00
    Picture

41. STEVENS, NY, PERFECT, 3 3/4 inch spoke wrench, left picture, G+ ......... Sold $30.00
    Picture

42. DUDLEY TOOL CO. 3 inch spoke wrench. Pat May 29, (18)94, right picture,G+ ......... $25.00
    Picture

43. REINHARD McCABE CO., Minneapolis, Minn, 10 inch quick-adjust, plier-type wrench, G+ ......... $85.00
    Picture

Back To Tool Index Back to Homepage