SAWS and SHARPENING TOOLS FOR SALE

This is an index of saws and sharpening tools for sale. Some of them will have a button to click to see a Picture. ... Instead of having to load each image to continue, just scroll this list and click to see an image. This list has saws, and sharpening miscellaneous, especially for cross cut and hand saws.
Back To Tool Index Back to Homepage

Note: I have a New Tool Order Form that goes through a secure server and will be encrypted when you return it. So, it is safe to give credit card information. Just click on Click To Order in any section, or right here.
Saws [Click To Order]
  1. G. H. BISHOP, PAIR OF BACK OR DOVETAIL SAWS, 10 inches, 15 tpi. One is crosscut the other is rip. It seemed like a good idea to offer these as a pair. The handle of the rip saw is broken at the bottom. The handle wouldn't be that tough to repair, especially since there is a pattern. They are both faintly etched, Made ... for Western Illinois State- Normal School. There are some numbers stamped on the handles. They could use a bit of sharpening, G+ .......... $75.00
    Picture

  2. HENRY DISSTON & SONS, D-100, 28 inches, Skewback, 5 tpi rip saw. Apple handle is deeply carved and has a finger hole. Five screws. Some of the finish is off the handle. The logo isn't too visible and the blade has some staining, G+ .......... $85.00
    Picture

  3. HENRY DISSTON & SONS, D-8, 26 inches, 8 tpi crosscut. 5 screws,apple handle. Blade has some minor staining and can use sharpening, G+ .......... $35.00
    Picture

  4. E. C. ATKINS NO. 2 BACK SAW, 16 inches, 12 tpi crosscut. Silver Steel. Apple handle. Fine .......... $60.00
    Picture

  5. HENRY DISSTON & SONS, D15 LIGHTWEIGHT, Victory Logo, 26 inches, 11 tpi crosscut. Five screws. Laminated beech? handle with red stain. Blade has some minor staining, G+ .......... $65.00
    Picture

  6. HENRY DISSTON & SONS, D-95, 26 inches, 11 tpi crosscut. Tan and brown bakelite handle. A very nice saw, the blade has some very minor staining. There is a small owner's name along the top edge, G+++ .......... $85.00
    Picture

  7. HENRY DISSTON & SONS, D-23, Lightweight, 26 inches, 10 tpi crosscut. Five screws, carved cherry? handle. Some of the finish is off the handle. Blade has some minor staining and can use sharpening, G+ .......... $40.00
    Picture

  8. GEO. H. BISHOP & CO. NO. 7 BACK SAW, 20 inches, 11 tpi crosscut. Nice older delicate apple wood handle. I'm calling this a back saw because the back edge doesn't curve in like a miter box saw. Very nice, G+++ .......... $70.00
    Picture

  9. E. C. ATKINS NO. 590, DOCKING SAW, 25 inches, 4 1/2 tpi crosscut. Silver Steel. This is for cutting large timbers, like for a dock, not cow's horns. Iron handle. There is a bit of stain on the blade, but this is a very nice saw. Fine .......... $70.00
    Picture

  10. HENRY DISSTON & SONS, VENEER & PEG SAW, Beech handle. A small hand-held saw used to trim pegs flush with the surface or trim veneer. Has a little bit of light rust, but still attractive and functional, G++ .......... $30.00
    Picture

  11. KEEN KUTTER STAIR SAW, A rare Keen Kutter stair saw with very graceful lines. The KK mark is stamped on the body and etched on the six inch blade, Fine ........... $125.00

    Picture

  12. HENRY DISSTON & SONS, 240 For Cutting Metal, 18 inches, beech handle. Blade has some minor staining and can use some sharpening, G+ .......... $35.00
    Picture

  13. ATKINS NO. 2000, 26 inches, 5 1/2 tpi rip. Silver Steel. Stylized beech handle has a design patent ... 115876. Has a 1940s look to it, G+ .......... $45.00
    Picture

  14. ATKINS NO. 65 PERFECTION, 26 inches, 9 tpi crosscut. Silver Steel. Apple handle with wheat carving. Blade has some minor staining and a few small rust spots, but it's quite crisp,Sharp. G++ .......... $60.00
    Picture

  15. HENRY DISSTON & SONS, K-3 KEYSTONE PACEMAKER, 26 inches, 5 1/2 tpi rip. Picture logo has two runners on it. Crisp stained hardwood handle. Blade has some minor staining. Sharp, G++ .......... $50.00
    Picture

  16. ATKINS NO. 13, PRUNING SAW, 14 inches, looks like a fruitwood handle. Teeth could use a touch-up sharpening, G+ .......... $40.00
    Picture

  17. ZENITH COMPASS SAW, Beech handle. Needs some sharpening, G+ .......... $20.00
    Picture

  18. JEWELER'S SAW, small size, delicately crafted, rosewood handle, G++ ............. $40.00
    Picture

Handsaw Sharpening
I have some Stanley Saw Set Directions that I have posted in my Features Section

  1. STANLEY NO. 42X PISTOL-GRIP SAW SET. For back and panel saws 18 gauge or thinner, 10 tpi or less. Doesn't have the attachment for circular saws - in some years it wasn't included. 96% of the japanning remains. Includes a copy of the instructions, Fine ........... $45.00
    Picture

  2. STANLEY NO. 42 PISTOL-GRIP SAW SET. For back and panel saws 18 gauge or thinner, 10 tpi or less. Decal on body. This one did not have the attachment for circular saws - in some years it wasn't included. 90% japanning, has some light rust. In the original box with instructions, G++ ........... $45.00
    Picture

  3. STANLEY NO. 42 PISTOL-GRIP SAW SET. For back and panel saws 18 gauge or thinner, 10 tpi or less. This one did not have the attachment for circular saws - in some years it wasn't included. 94% japanning, G++ ........... $25.00
    Picture

  4. STANLEY NO. 42W PISTOL-GRIP SAW SET. The new style of the 42 (same as the 42SS). For back, panel and circular saws 18 gauge or thinner, 4 to 16 tpi. Has the attachment for circular saws built in. Comes in the original box with top label illustration for the New Design. 98% of the black finish remains. This one is nice because it sets a wider range of tooth sizes, and the dial to set it has numbers, which makes it simpler to use. Includes the original instructions, G++ ........... $55.00
    Picture

  5. STANLEY NO. 42SS PISTOL-GRIP SAW SET. The newer style of the 42. For back, panel and circular saws 18 gauge or thinner, 4 to 16 tpi. Missing a lot of the finish on the handles, but clean and fully functional. This one is nice because it sets a wider range of tooth sizes, and the dial to set it has numbers, which makes it simpler to use. Includes a copy of the instructions, G+ ...........Sold $20.00
    Picture

  6. STANLEY HANDYMAN NO. 432 SAW SET. For back and panel saws 18 gauge or thinner. The saw set has a graduated dial which can be quickly adjusted to give the correct anvil setting for 5 to 11 point saws. In the original box, Fine ........... $25.00
    Picture

  7. STANLEY HANDYMAN NO. 432 SAW SET. For back and panel saws 18 gauge or thinner. The saw set has a graduated dial which can be quickly adjusted to give the correct anvil setting for 5 to 11 point saws. The tool is red and black, G++ ........... $15.00
    Picture

  8. STANLEY NO. 442 PISTOL-GRIP SAW SET. For back and panel saws 18 gauge or thinner, 10 tpi or less. The lightest and stiffest saw set on the market. Marked Patent Pend. About 95% of the green paint remains, as well as a Stanley Tools decal. A copy of instructions will be included, G++ ........... $35.00
    Picture

  9. MORRILL'S PATENT SAW SET. For handsaws and panel saws. Feb 24, Dec 14, 1880 patent dates stamped on it, G+ ........... $15.00
    Picture

  10. DISSTON "TRIUMPH" No. 28 SAW SET. Adjustable. For handsaws, back saws and panel saws.The triumph has one plunger to hold the saw and another to set the tooth. Disston claims it's the best hand set ever put on the market. Includes copy of the instructions, G++........... $35.00
    Picture

  11. SAW JOINTER, For rip and crosscut handsaws. Looks like a Simmonds, G+ ........... $30.00
    Picture

  12. DUNLAP SAW JOINTER, For rip and crosscut handsaws. Aluminum body. Ready to go to work, G+ ........... $24.00
    Picture

  13. WENTWORTH'S SAW VISE, Pat Apr. 8, 1879., High quality cam-action lock. No clamp - this one screws on the side of a bench or onto a board that fits in a bench vise., G+ ...........Sold $40.00
    Picture

  14. FOLDING SAW VISE, Gunn & Hanna, Pug, PA. Pat'd July 16, 95 and Nov 24, 95 (That's 1895) Has two points like bench dogs to hammer into a bench, saw horse or stump. and a screw hole at the bottom. A good, portable vise, G+ ........... $35.00
    Picture

  15. SAW VISE, NO. 3, Has a lever lock and is adjustable from the mounting clamp. Looks like it's missing the piece of leather that fits into one jaw. It's functional without it. Most saw vices have just the metal jaws, but it's an easy fix to glue in a thin strip of leather if you want, G+ ........... $35.00
    Picture

Cross-cut Saw Sharpening
I have some Crosscut Saw Setting Directions that I have posted in my Features Section
  1. W. E. GIBBS, jointer for cross-cut saws. This is the long one. 1914 and 1917 patent dates, lightly cleaned, G+ ...........Sold $110.00
    Picture

  2. STANLEY NO. 43 PISTOL-GRIP SAW SET. For large cross-cut saws such as buck saws, two man saws and circular saws 11 gauge or thinner, having 5 or less teeth per inch. 97% japanning, Fine ........... $40.00
    Picture

  3. MORRIN HAMMER SAW SET, Seattle, WA. From the stampings, it looks like it was made in 1929. This one is quite uncommon, and popular for use, G+ ........... $70.00
    Picture

  4. ATKINS, SWAGE BAR HAMMER, Early Atkins mark. For drawing out short teeth or swaging saws before using the regular swage or upset. There's an internal crack in the handle, but I don't think it will effect use, G+ ...........Sold $30.00
    Picture

  5. SAW SETTING HAMMER, Unmarked, but very well made. One face is flat, the other is slightly domed, G+ ...........Sold $30.00
    Picture

  6. CROSS-CUT SAW TOOL SET, Includes saw jointer/raker gauge for use on the larger cross-cut saws. Not marked but looks like Atkins. A setting block and spider are included. They are not from the same manufacturer. G+ ........... $25.00
    Picture

  7. ATKINS & NO. 15 PRECISION CROSS-CUT SAW TOOL, for jointing and gauging the raker on the larger cross-cut saws. Aluminum body, micrometer adjustment on the depth gauge. The filing gauge is tapered and graduated to file to different depths. The top and bottom plates are rusty, but that won't affect use, G+ ...........Sold $40.00
    Picture

  8. DISSTON "TRIUMPH" No. 18 SAW SET. 1899 patent date cast in the handle. Adjustable. For circular and cross-cut saws, 14 gauge and lighter.The triumph has one plunger to hold the saw and another to set the tooth. Disston claims it's the best hand set ever put on the market. Includes copy of the instructions, G++........... $45.00
    Picture

  9. SIMONDS SETTING GAUGE (SPIDER), For any large-tooth saws, Name cast in bottom. G+ ........... $10.00
    Picture


. Back To Tool Index Back to Homepage